Produkte / Plastics / Torzen®

Torzen®

PA66-Compounds, darunter auch hochtemperaturbeständige Typen (Markenname Torzen® Marathon)

Die PA66-Compounds der Torzen® Familie, darunter auch hochtemperaturbeständige Spezialitäten (Markenname Torzen® Marathon), eignen sich für den Einsatz in der Automobil-, Elektro-/Elektronik-, der allgemeinen sowie der Konsumgüterindustrie.

Informieren Sie sich in den technischen Datenblättern zur Torzen® Familie oder entdecken Sie die anderen Produkte der RadiciGroup High Performance Polymers.

Kennnummer oder Name:

Markt:

Farbkennzeichnung:

Filter entfernen

Torzen® GT3300HSL

PA66 33% glass fiber reinforced injection moulding grade. Toughened, heat stabilized. Black colour Suitable for parts requiring improved impact strength along with enhanced stiffness.

Torzen® T3000HSL

PA66 injection moulding grade. Toughened, heat stabilized. Black colour. Suitable for parts requiring good impact resistance and improved surface appearance. Good properties retention after ageing.

Torzen® G3000HR BK34

PA66 30% glass fiber reinforced injection moulding grade. Heat stabilized, hydrolysis resistance. Black colour. Suitable for parts requiring high stiffness and good mechanical resistance.

Torzen® G3001HR

PA66 30% glass fiber reinforced injection moulding grade. Heat stabilized, hydrolysis resistance. Black colour. Suitable for parts requiring high stiffness and good mechanical resistance.

Torzen® G3300HR

PA66 30% glass fiber reinforced injection moulding grade. Heat stabilized, hydrolysis resistance. Black colour. Suitable for parts requiring high stiffness and good mechanical resistance.

Torzen® G3300HS1L

PA66 33% glass fiber reinforced injection moulding grade. Heat stabilized. Natural colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® G3300HSL

PA66 33% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring high stiffness and good mechanical resistance.

Torzen® G3301HSL

PA66 33% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® GM3800HSL

PA66 38% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring improved stiffness and mechanical strength, reduced shrinkage, low warpage.

Torzen® G5002HSL

PA66 50% glass fiber reinforced injection moulding grade. Heat stabilized. Natural colour. Suitable for parts requiring very high stiffness and mechanical resistance, along with good heat ageing properties retention.

Torzen® Marathon FRU4800XHL

PA66 flame retardant injection moulding grade. Improvement of mechanical properties retention versus standard polyamide 66 after heat ageing Halogen and phosphorus free. Black colour. Suitable for parts where fire retardancy is required. Rated V-0 at 0.4 mm according to UL-94.

Torzen® Marathon G3500XHL

PA66 35% glass fiber reinforced injection molding grade with enhanced thermal resistance in contact with hot air. High improvement of mechanical properties retention versus standard polyamide 66 after heat ageing. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® Marathon G3000XHL

PA66 30% glass fiber reinforced injection molding grade with enhanced thermal resistance in contact with hot air. High improvement of mechanical properties retention versus standard polyamide 66 after heat ageing. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® Marathon G4000XHL

PA66 40% glass fiber reinforced injection molding grade with enhanced thermal resistance in contact with hot air. High improvement of mechanical properties retention versus standard polyamide 66 after heat ageing. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® Marathon G5000XHL

PA66 50% glass fiber reinforced injection molding grade with enhanced thermal resistance in contact with hot air. High improvement of mechanical properties retention versus standard polyamide 66 after heat ageing. Black colour. Suitable for parts requiring very high stiffness and mechanical resistance, along with good heat ageing properties retention.

Torzen® T2000HSL

PA66 injection moulding grade. Toughened, heat stabilized. Black colour. Suitable for parts requiring good impact resistance and improved surface appearance. Good properties retention after ageing.

Torzen® G1500HSL

PA66 15% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring improved stiffness.

Torzen® G3000HS1L

PA66 30% glass fiber reinforced injection moulding grade. Heat stabilized. Natural colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® G3000HSL

PA66 30% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® G3300HSLF

PA66 33% glass fiber reinforced injection moulding grade. Good flowability, heat stabilized. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® G3302HSL

PA66 33% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® G3500HR

PA66 35% glass fiber reinforced injection moulding grade. Heat stabilized, hydrolysis resistance. Black colour. Suitable for parts requiring medium stiffness and good mechanical resistance.

Torzen® G3500HSL

PA66 35% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® G4001HSL

PA66 40% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring high stiffness, good mechanical resistance and good heat ageing properties retention.

Torzen® G5000HR

PA66 50% glass fiber reinforced injection moulding grade. Heat stabilized, high hydrolysis resistance. Black colour. Suitable for parts requiring very high stiffness and good mechanical resistance. Particularly fit to work in contact with automotive cooling circuit liquids.

Torzen® G5000HSL

PA66 50% glass fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring very high stiffness and mechanical resistance, along with good heat ageing properties retention.

Torzen® GT1400HSL

PA66 14% glass fiber reinforced injection moulding grade. Toughened, lubricated and heat stabilized. Black colour. Suitable for parts requiring improved impact strength along with enhanced stiffness. A typical application are anti-vibration rings.

Torzen® GT3300HS1L

PA66 33% glass fiber reinforced injection moulding grade. Toughened, heat stabilized. Natural colour. Suitable for parts requiring improved impact strength along with enhanced stiffness.

Torzen® 1500HS

PA66 15% mineral filled injection moulding grade. Heat stabilized. Black colour. Suitable for parts requiring good dimensional stability, reduced shrinkage and low warpage.

Torzen® Marathon FRG2500XHL

PA66 flame retardant injection moulding grade. 25% glass fiber reinforced. Improvement of mechanical properties retention versus standard polyamide 66 after heat ageing Halogen and phosphorus free. Black colour. Suitable for parts requiring fire retardancy, medium stiffness and good mechanical resistance. Rated V-0 according to UL-94.

Torzen® T3000HS1L

PA66 injection moulding grade. Toughened, heat stabilized. High flowability. Black colour. Suitable for parts requiring good impact resistance and improved surface appearance. Good properties retention after ageing.

Torzen® G3000HR

PA66 30% glass fiber reinforced injection moulding grade. Heat stabilized, hydrolysis resistance. Black colour. Suitable for parts requiring high stiffness and good mechanical resistance.